Types of Floor Jacks
A floor jack can mean different things depending on where you use it. The jack used in most car repair shops or garages to lift cars and make repairs conveniently under the car or a tire is called an automotive floor jack. However, another jack is utilized to raise bigger ‘things’ like buildings or houses that needs its beams to be replaced because they are sagging. The last type of jack is used for phone connections. It got its name because it is typically installed on the floor and wall intersection. Notice how all equipment are called floorjacks but have entirely different meanings and purposes.
While there are a lot of different jacks available, this article would only focus on the first type of floorjack mentioned: automotive floor jacks. The other two types of jacks will be reserved for a different article.
It is common for people to always associate the term ‘floor jacks’ with automotive floor jacks as this had always been the first floorjacks produced. This one uses a pump arm, hydraulics or air compression to raise vehicles and access the undercarriage easily. The automotive floorjack makes changing tires or doing a brake job easier to accomplish. These are handy tools that can be found in car hoods, garages, farms and other places where there are vehicles that may need to be repaired. Automotive jacks have made a lot of repairs easier for the common do-it-yourself mechanics and vehicle owners.
On the other hand, this automotive jack should not be confused with hydraulic lifts which are used in most auto repair shops.
A more stable ground is required for automotive floorjacks to eliminate improper balance. The ground should not shift as it could seriously harm the vehicle. A lip can be connected to the automobile and raise it gently by pumping the arm, hydraulic system or air compressor.
Automotive jacks have different ratings depending on the weight that they can lift without sacrificing security. These automotive floorjacks are very powerful that they can up to 20 tons. For your personal use, you can purchase a 2 or 3-ton jack especially if you’re going on long road trips so you can easily change your tire whenever needed. Obviously, the bigger your vehicle, the stronger is the jack required to do the job. Farm equipment, on the other hand, may necessitate a 10-ton automotive jack.
Having written extensively for more more than 8 years on floor jacks [http://automotivefloorjackssite.com], Brandy has dedicated a lot of time to writing about the best way to find automotive floor jacks [http://automotivefloorjackssite.com].
Article Source: http://EzineArticles.com/3918081