Floor Fan Lowes . There are some tremendous advantages to a floor fan as opposed to one that is located on a desk, for instance. A floor fan is usually highly portable so that it can be used in any room where cooling is needed.
A floor fan may be described as a pedestal fan because they sit on a pedestal. The majority of floor fans also feature a certain degree of tiltability. Being able to tilt a fan means greater versatility as to where you wish the air to be directed. The tilting of a fan unit allows the fan to more proficiently direct the desired air circulation in a greater number of directions. Despite the fact that it may be highly desirable to make available an extensive range of tiltability designers have noted that it may result in a fan becoming unstable. This is why the pedestal fan is usually wide and basically heavy to keep the fan from being overly tilted into a position that may cause a floor fan to easily topple over. This of course would be due to its unequal center of gravity.
Thus a floor fan will have the pedestal which is comprised of a base and then to this is attached an elongated fan unit support which extends usually in a perpendicular direction to its base. There are of course, various UL dictates with regard to its stability requirements.
Most floor fans will also be able to oscillate. They cannot oscillate 360 degrees the way that a ceiling fan does but they ordinarily have a range of oscillation. Most of the time a pedestal fan will oscillate 90 degrees or half of a half, sometimes referred to as a quarter oscillating movement.
A pedestal fan will usually also present adjustments to provide adjustable operating height as well as oscillation. Adjusting the height is of extreme importance if the floor fan is being used in a bedroom for instance, as you will probably wish to use it to keep cool while you sleep in a low bed. Most pedestal fans will adjust to range from a low of 20 inches to a height of 54 inches providing you with an extremely wide latitude.
Sometimes a fan has a timer on it, though these are more rare. A timer allows you to fall asleep for instance, but as the night wears on, a sleeping person will have a reduced body temperature, thus you may wish to use a timer to shut off the fan after a certain amount of time being asleep.
Especially in the bedroom, you may truly appreciate a remote control for the floor fan. This would prevent you from having to get up to change the settings, or simply turn it on or off.
A floor fan will naturally collect dust on its blades necessitating occasional cleaning. Carefully study how the grill is attached, and what it takes to remove the blades in order to clean them. Finding out that you are unable to clean it properly is a job best done prior to purchase, or at least while the unit can still be returned.
If you are looking for portable fans, check out small fan [http://www.smallfan.org/] for more ultra portable fans.
As the summer temperatures increase each year, the start of each season marks the quest for more upgraded and cost efficient cooling products. Vent Axia is one of the leading suppliers and manufacturers of ventilation and air handling systems both in the UK and worldwide. The domestic and commercial ventilation industries are expanding and furthermore, Vent Axia provides air conditioning products such as extract fans, air handling units, wall fans and meteor coolers, all of which are most likely to meet client necessities. The Vent Axia spare parts are supplied for current and future customers to promote energy and financial efficiency for both property owners and industrial builders. The whole house fan is currently the most popular and beneficial product in the air conditioning model range, for residents and businesses alike. Ceiling fans are usually used in addition to the product.
The technology of the whole house fan involves attracting the cool air from outside the house to the interior, through open windows. It then uses the hot air from inside the house and replaces it with the cool air. Ceiling fans are usually used in addition to the whole house fan, as they maximize the effect of the first product. These are highly efficient, comfortable and inexpensive way of cooling a house or a building. One of the reasons it is so efficient for businesses is that it uses a maximum of 90% less energy than compressor air conditioners. This means that working in the summertime does not need to be exhausting, as even if the fan operates throughout a whole day, it is still more green and economical than other passive cooling products. The whole house fan can be used during the evening or whenever the temperatures are cooler outside. In this way, the interior materials of rooms and offices can be cooled down. During the day, the fan can be switched off and the ceiling fans can take over and maintain the interior cooling. If residents or employees want to heat the environment, the fan can be turned on during the day and heat from the exterior can replace the cool from the interior.
If both air handling instruments are used as the optimum combination, the use can also be seasonal, for spring, summer and autumn. The whole house fan alone reduces the need for air conditioning and in combination with the ceiling fans, it can save up to £3,250 per year. Winter is the only time of year in which the whole house fan consumes a lot of energy as it takes a lot of space in the attic and the space need thorough isolation to prevent the cold from coming in. This is performed by installing a cover on the top or the bottom of the fan, which needs replacing when the fan is not operational over an extensive period of time.
The whole house fan consists of a two-speed technology which enables a quick freshening of the entire house or office floor, at a low sound. It is equipped with a variable speed element, which makes it flexible in air circulation. Control options include a power switch, a multiple speed rotational button and a clock-based device which enables the power cut of the fan at formerly selected hours or after certain time intermissions. The motoring equipment is one of the most important elements to consider when purchasing a fan, because one as large as the one to fit a fan for an entire floor can be quite expensive. Customers usually use a direct drive unit, which is attached straight to the motoring channel. Other benefits of this type of unit are that it operates at a higher speed and requires less maintenance than its belt-functional substitute.
To install a whole house fan, the only requirement before starting the work is to accurately measure the space needed for the fan which involves a few simple designs. The calculations also enable calculating the fan capacity, which depends on the volume of the building and the floor area. Another requirement is to check if there is enough space in the attic for the Net Free Vent Area, which ensures that the fan will operate with maximum efficiency. After the measures have been taken in consideration, the next greater fan capacity can be chosen. Vents are usually installed in the centre of the home, to guarantee that the air will be equally ventilated. The control systems for the fan should be mounted on walls at a higher distance from the light controls to prevent accidental activated procedures of the fan. To prevent the hot air from entering the room space, all the gaps in the ceiling must be aided before installation.
During the hottest time of the year, the home and office interiors are heated because of the high temperature generated by residents or employees and running technological equipment. The air outside is always cool and fresh in the earliest and latest hours of a day. This is why a whole house or floor fan is the choice for a frequently used building, during the hottest days in the summertime. The technology helps eliminate high temperatures from the frequented areas, by excluding the hot air and replacing it with cool air from outdoors. The advantages the whole floor fan has over air conditioning are environmental friendliness, energy saver, cost effective and installing a cool temperature in the building materials of the area.
Glenn Tucker writes for a variety of electrical supplier blogs. With an engineering background Glenn helps to make sense of many electrical engineering problems and enjoys helping people source items such as a kitchen extractor fan and a bathroom fan.
Article Source: http://EzineArticles.com/6591817